PD1000 & PD1000 IO Portable Shredder

No building, No Electrical work, No concrete slab required. Just turn the engine key and start shredding. Dual shaft low-speed high torque shear shredding. All electronics are solid-state and housed in a sealed control cabinet. Hydraulic filters and gauges are all visible and easy to access. Easily transportable with a non-CDL vehicle such as a 1 ton pick up truck. Shredder head removes from the system in less than one hour and can be swapped with a fresh head or maintained safely at ground level. The PD1000 and the PD1000IO work together as two sperate units, one feeds the material while the other shreds it. 

Request a Quote
  • Designed and manufactured in the USA
  • 13,000 lbs. total gross weight
  • 1000 series hydraulic shredder 36" x 28 " cutting chamber 2" x 14.625" four hook knives standard (can be configured with different sized knives)
  • Shreds 4 to 5 tons per hour (numbers based on automotive tires 20 lbs. per tire)
  • PLC controlled overload and auto-reverse (can be custom programmed)
  • Low maintenance hydraulic system
  • 92-inch out-feed height
  • Hydraulic folding outfeed conveyor
  • 140 HP John Deere Turbo Diesel
  • 50-gallon fuel tank provides 24 hours of run time
  • 1000 series modular head for 1-hour downtime at sharpening
  • BCA Industries PD1000 Portable shredder is a general-purpose primary shredder system on an easy-to-transport and use platform.
  • Automotive and Light Duty Truck Tires
  • Semi tread only after sidewall removal
  • Plastics & Pallets
  • Construction and Demolition Waste
  • Electronic Waste, Ferrous, and Non Ferrous metals
  • Furniture, Paper & Clothing

Call BCA Industries today to receive a free quote or learn more about our PD1000 & PD1000 IO shredders.

What makes A 1000 Series Shredder different?

A high torque shredder that has no “catastrophic cost” parts. They have been designed out of this shredder making it the least expensive cost per ton HIGH TORQUE SHREDDER to operate.

  • NO COMPLEX EXPENSIVE GEARBOX to wait for and replace from the manufacturer but a simple double HD chain drive and oil bath system. Easy access panels to help with inspection.
  • A redundant and inexpensive “off the shelf” hydraulic system employing dual motors that are not only inexpensive and American Made but are also readily available.
  • Every part of the cutting head can be replaced inexpensively making rebuild cost lower and more predictable from knives to spacers to super nuts to dead zones.
  • A proprietary 6 key shaft design to eliminate shaft “washout”. The old hex shaft others use has been eliminated along with all of its well known service problems.
  • Downtime and catastrophic costs are shredder owner’s number 1 industry complaint. All 1000 series machines both portable and stationary have a MODULAR HEAD that can be swapped out at far less cost than any other manufacturer for a 1 hour change out to make downtime near zero. An extra head is offered at a very inexpensive price to help owner have near ZERO DOWNTIME.
  • All 1000 series system shredders, conveyors, magnets etc. are built by BCA here in Milwaukee. Fully integrated to work together for maximum efficiency with one number to call if there’s any issue.
  • Elimination of a full time millwright or mechanic for an owner. A 1000 series head rebuild program where an owner can inexpensively have the knives and head rebuilt by the factory with a service warranty.

THE BCA Head Service Program

  • The 1000 series head was uniquely engineered in the design to be lighter weight and still industrial durable. This allows BCA to offer the ONLY TRUE PORTABLE shredder in its class.
  • The 1000 series head removes with a standard 5,000 lb. forklift. 4 bolts and 6 hoses and it gets placed on our CUSTOM STEEL PALLET INCLUDED to protect it while shipping.
  • The head can be shipped back to BCA in usually 2 days from anywhere in the US using inexpensive LTL carriers.
  • The head is factory serviced by experienced technicians with new or rebuilt BCA knives and spacers. This is done at a labor and materials cost (including rebuilt knives) of just $7,900.00 if there are no other parts needed. FACTORY CERTIFIED AND SHIPPED BACK usually with a 7 to 10 day turnaround. On a primary tire shredder for instance that is less than 6 cents per tire.
  • Knowing that you do not require that level of skill on staff allows the shredder owner to greatly REDUCE LABOR COST and uncertainty.